Filter
Top Products
Simon Security System
11
calling in a report to the central monitoring station or a pager, due to an action made by
you or someone at the security system site.
How to Use
Your
Touchpads
Touchpads are used to control the security system from any location within or near your
home.
Remote Handheld Touchpad
Interfacing with the system using a Remote Handheld Touchpad is similar to using the
panel.
System Status
Press System Status once to hear information about your system from the panel. See
“Status Beeps”.
ARM Doors & Windows
Press Arm Doors & Windows button once to turn the security system protection on for
all protected doors and windows.
Press twice to eliminate the pre-programmed entry delay.
ARM Motion Sensors
Note
Depending upon how your
dealer programmed your
panel, you may be required
to enter your access code to
arm the system.
Press Arm Motion Sensors button once to turn protection on for all Motion Sensors.
Use when no one is home. This is usually used in combination with ARM Doors &
Windows. Press twice to activate the Latchkey feature.
Disarm
Press Disarm button once and enter your access code using the NUMERIC buttons to
turn security protection off. To subdisarm the system, enter the master access code.
Subdisarm
Enter your master access code using the NUMERIC buttons while the system is dis-
armed. Panel will announce, system disarmed. The Disarm button on the panel will
begin to blink.
Emergency
Press both EMERGENCY buttons for 3 seconds to cause the system to call a central
monitoring station to report a non-medical emergency.
Keychain Touchpad
For any keypress on the Keychain Touchpad, hold the button until the indicator light
blinks.
If your installer programmed the Keychain Touchpad with no entry delay, and you
armed the system with the Keychain Touchpad, you must disarm your system before
entering the home to avoid causing an alarm.
If your installer programmed your system for Remote Touchpad Arming, you must
enter your home to start the entry delay before you can use your Keychain Touchpad to
disarm the system.
To avoid causing false alarms, check with your installer on how your touchpad
Security system devices cannot compensate you for the loss of life
!
options are programmed
Warning
!
7
4
1
89
5
2
6
3
Off
sP
EMERGENCY
On
d&sres Hol hBtoeKy
DISARM
SYSTEM
STATUS
Doors &
Windows
ARM
ARM
Sensors
Motio
n
-