Filter
Top Products
12
• Place the front coal between the heat shield and the
flame baffle so that its ends sit flat against the burner skin
Diagram 9
• Put five of the round coals on the front between the
fingers of the flame baffle.
• Put two rectangular coals behind the first row and at
either side to touch the reflector panels, Diagram 10
• Place four more round coals behind the first row so they
sit on the fingers, the two at each side touch the rectangular
coals, Diagram 11
AR0362
10
AR0361
9
AR0360
8
• Put the last three round coals behind the centre row and
touching the back panel, Diagram 12
5.1 Ensure the rope seal fitted to the rear of the glass frame is
intact.
• Use a ceramic glass product generally sold for cleaning
ceramic hobs to clean the glass front
• Refit glass frame and tighten screws evenly, Diagram 13
With the top still supported or removed:
• Refit front by locating in grooves and lowering into
place, Diagram 14
13
AR1909
5. REPLACING THE DOOR
AR0364
12
AR0363
11
INSTALLATION INSTRUCTIONS
INSTALLATION