Stovax 8627 MA Indoor Fireplace User Manual


 
16
4. ARRANGEMENT OF FUEL BED
COMPONENTS
ADVICE ON HANDLING AND DISPOSAL OF FIRE
CERAMICS
The fuel effect and side panels in this appliance are made
from Refractory Ceramic Fibre (RCF), a material which is
commonly used for this application.
Protective clothing is not required when handling these
articles, but we recommend you follow normal hygiene
rules of not smoking, eating or drinking in the work area
and always wash your hands before eating or drinking.
To ensure that the release of RCF fibres are kept to a
minimum, during installation and servicing a HEPA filtered
vacuum is recommended to remove any dust accumulated
in and around the appliance before and after working on it.
When servicing the appliance it is recommended that the
replaced items are not broken up, but are sealed within
heavy duty polythene bags and labelled as RCF waste.
RCF waste is classed as stable, non-reactive hazardous waste
and may be disposed of at a licensed landfill site.
Excessive exposure to these materials may cause temporary
irritation to eyes, skin and respiratory tract; wash hands
thoroughly after handling the material.
4.1 Place log A on to the burner. Ensure the rear of the log
touches the rear of the burner. See diagram 3.
AR0816
3
CENTRALISE THE LOG BETWEEN THE BURNERPORTS AT
EITHER END.
Four of the remaining logs have location holes on the
underside. These locate on the studs at the front of the fire.
4.2 Place log D on the third stud from the left and resting at the
rear of log A. See diagram 4.
4
AR1194
4.3 Place log C on the second stud and resting at the rear on
log A. See diagram 5.
5
AR1195
4.4 Place log B on the first stud. The recess on the underside of
the log should locate on the top of log C. See diagram 6.
6
AR1196
4.5 Place log E on to the last stud. The recess on the underside
of the log should locate on to the top of log D. See diagram
7.
7
AR1197
4.6 Place log F resting on the rear tray and leaning forward to
locate in the recess in log E. See diagram 8.
INSTALLATION INSTRUCTIONS
INSTALLATION