Filter
Top Products
2.1 L Hydraulic Pump Installation Instructions 7
➊
Shadow Drive
➋
Port line
➌
Starboard line
➍
Return line
➎
Helm
➏
Power assist module
➐
Pump
➑
Shut-off valves
➒
Steering cylinder
• The pump must be recongured if the boat is
equipped with an unbalanced steering cylinder
(page 3).
• The pump should be mounted the pump
horizontally if possible.
• If the pump must be mounted vertically, mount
it with the hydraulic connections facing upward.
• Removal of the power assist module may be
necessary to gain access to the ttings, hoses,
and bleed-tee tting.
• The pump must be installed between the
cylinder and the power assist module.
• Garmin recommends using the t-connector
method to connect the hydraulic lines to the
pump. See the diagram page 8 to view the
alternate connection method.
• To allow for easy pump disabling and removal,
Garmin recommends installing shut-off valves
in the hydraulic lines between the pump
manifold and t-connectors.
➊
➑
➐
➏
➎
➍
➌
➋
➑
➑
➒