Filter
Top Products
6 2.1 L Hydraulic Pump Installation Instructions
➊
➋
➌
➍
➎
➏
➐
➑
➏
➏
➒
➊
Return line
➋
Shadow Drive
➌
Port line
➍
Starboard line
➎
Pump
➏
Shut-off valves
➐
Lower helm
➑
Upper helm
➒
Steering cylinder
• The pump must be recongured if the boat is equipped with an unbalanced steering cylinder (page 3).
• The pump should be mounted the pump horizontally if possible.
• If the pump must be mounted vertically, mount it with the hydraulic connections facing upward.
• Garmin recommends using the t-connector method to connect the hydraulic lines to the pump. See the diagram page 8 to view the alternate
connection method.
• To allow for easy pump disabling and removal, Garmin recommends installing shut-off valves in the hydraulic lines between the pump manifold
and t-connectors.