Filter
Top Products
2.1 L Hydraulic Pump Installation Instructions 5
notice
If the steering system in your boat does not match any of the hydraulic layouts in this manual and you are unsure how to install the pump, contact
Garmin Product Support.
Before you start the pump installation, identify the type of hydraulic steering system in your boat. Each boat is different, and you must consider
certain aspects of the existing hydraulic layout before deciding where to mount the pump.
➊
Shadow Drive
➋
Port line
➌
Return line
➍
Pump
➎
Starboard line
➏
Shut-off valves
➐
Helm
➑
Steering cylinder
• The pump must be recongured if the boat is equipped
with an unbalanced steering cylinder (page 3).
• The pump should be mounted the pump horizontally
if possible.
• If the pump must be mounted vertically, mount it with
the hydraulic connections facing upward.
• Garmin recommends using the t-connector method
to connect the hydraulic lines to the pump. See the
diagram page 8 to view the alternate connection
method.
• To allow for easy pump disabling and removal,
Garmin recommends installing shut-off valves in
the hydraulic lines between the pump manifold and
t-connectors.
➊
➏
➎
➍
➌
➋
➐
➏
➏
➑