Filter
Top Products
56
SET POINT
F
AUTO FAN
SET POINT
F
AUTO FAN
Test Mode
Press the , , & buttons simultaneously for 3 seconds.
This will activate the test mode.
The ON icon will appear for 5 seconds and the display will then revert to
the normal display. The test mode will time out after 1 hour. To cancel
test mode, unplug and replug the power cord.
Normal display.
This function is used to test the compressor operation. By turning it on,
it allows the service technician to bypass the compressor’s 3 minute
time delay.
ON
FAN
SPEED
FAN
MODE
TIMER
SCHEDULE