Filter
Top Products
13
Alerts
When the ¿ lter needs to be cleaned or replaced, the
CHECK
FILTER
icon displays.
SET POINT
F
AUTO FAN
79
FILTER
CHECK
FRR118
The alert can be dismissed by pressing the
FAN
MODE
and for 3 seconds.
The wait icon illuminates when the compressor 3 minute time delay is
SET POINT
F
AUTO FAN
79
FRR120
This means there is a compressor demand but the system is not ready
for the compressor to operate. For example a short power outage, the
compressor will not restart until the internal pressures of the compressor
are at the proper level.
3
FRR194
The 3 indicates a DIM setting of 100% (full brightness). Press the TIMER
SET (Refer to Figure 8) button within 15 seconds to save the setting.
Button inactivity for more than 15 seconds causes the display to time out
and return to the normal operating display.
Lock Control Panel
To lock the front panel controls, press and hold the
FAN
SPEED
+ buttons
for 3 seconds. The lock icon
Control panel buttons will not operate during lockout.
illuminates to indicate the locked status.
SET POINT
F
AUTO FAN
79
FRR116
To unlock, presses and hold the
FAN
SPEED
+ buttons for 3 seconds.
SET POINT
F
AUTO FAN
79
FRR117
The lock icon disappears to indicate unlocked status.
active.