Friedrich SQ10 Air Conditioner User Manual


 
12
4
FRR130
Use the or buttons to adjust the day (1 to 7). The day setting is up
to you the user. If you set the current day = 1, and today is Tuesday,
then Day 1 = Tuesday.
SET POINT
F
AUTO FAN
79
FRR131
Press TIMER SET (Refer to Figure 8) button to exit and save the SET
TIME function. The TIMER SET button must be pressed within 15 second.
Button inactivity for more than 15 seconds causes the display to time out
and return to the normal operating display.
ºF - ºC Select
SET POINT
F
AUTO FAN
79
FRR132
To switch from degrees Fahrenheit (F) to Celsius (C), press
and
buttons simultaneously for three seconds.
f
FRR133
An “F” will
À ash for 5 seconds and then revert to a normal display. To change
from F to C, press the
or button within 5 seconds.
C
FRR134
A “C” will À ash for 5 seconds and then revert to a normal display.
The ºF icon goes away and the ºC icon illuminates on the normal display.
SET POINT
AUTO FAN
26
C
FRR135
DIM Function
There are three separate display brightness levels, AUTO, 20% and full
(100%). To change the DIM setting, press the Power button for three
seconds.
1
FRR192
The 1 indicates a DIM setting of Auto (factory default). Use the or
buttons to change the setting.
2
FRR193
The 2 indicates a DIM setting of 20%. Press the TIMER SET button within
15 seconds to save the setting. Button inactivity for more than 15 seconds
causes the display to time out and return to the normal operating display.
s