Filter
Top Products
12
4. For indoor or outdoor installations.
5. The SubDrive300 should only be mounted with the wiring end
oriented downward. The controller should not be placed in direct
sunlight or other locations subject to direct rain or snow.
6. The mounting location should have access to 230 VAC electrical
supply and to the submersible motor wiring. To avoid possible
interference with other appliances, please refer to the enclosed
Installation Guide and observe all precautions regarding power
cable routing.
7. To assure maximum weather protection, the unit must be mounted
vertically with the cover properly aligned and secured with all eight
lid screws.
Wiring
To Motor
Power Supply
From Circuit Breaker
Wiring
To Motor
Pressure Sensor
Wiring
Power Supply
From Circuit Breaker
Pressure Sensor
Wiring
CORRECT INCORRECT