Filter
Top Products
www.fmiproducts.com
108794-01G24
TROUBLESHOOTING
Continued
OBSERVED PROBLEM
Dark residue on logs or inside
of replace
POSSIBLE CAUSE
1. Improper log placement
2. Air holes at burner inlet
blocked
3. B urn er fl ame h ole s
blocked
4. Improper venting or exces-
sive blockage
5. Excessive amounts of
embers and pan material
REMEDY
1. Properly locate logs
2. Clean out air holes at burn-
er inlets. Periodically repeat
as needed
3. Remove blockage or re-
place burner
4. Have the vent system in-
spected, including the ter-
mination cap. Remove any
restrictions or obstruction
5. Clear excess embers until
a minimum gap of 1/2"
remains under the grate