www.fmiproducts.com
108794-01G 15
Figure 24 - Installing Logs 3 and 4
Log 4
Log 3
FIREPLACE INSTALLATION
Continued
LOGPLACEMENTFORP325E(B)/
VP325E(B)MODELS
1. Place large back log (log 1) onto grate
making sure notches rest over grate (see
Figure 25).
2. Place log 2 onto front right side of grate
and back of log 2 into notch on right front
of log 1 (see Figure 25).
Figure 25 - Installing Logs 1 and 2
Figure 26 - Installing Log 3
Log 1
Log 2
Log 3
Log 1
Figure 27 - Installing Logs 4 and 5
Log 5
Log 4
Log 1
Log 3
3. Rest front of log 3 between rst two grate
ngers on left of grate assembly and rear
of log 3 into notch on left front of log 1(see
Figure 26).
4. Place top of log 4 into notch on log 1.
Rest log 4 on center of grate as shown
in Figure 27.
5. Place top of log 5 into notch on top right
of log 1 (see Figure 27). Rest log 5 be-
tween two middle grate ngers as shown
in Figure 28, page 16
To enhance the look of the hearth you may
optionally place provided lava rock around
front and sides of burner.