FMI M36E(B,H) Indoor Fireplace User Manual


  Open as PDF
of 32
 
www.fmiproducts.com
108796-01UT 15
INSTALLATION
Continued
LOG PLACEMENT FOR MODELS
M42E,M42EP,VME42ANDVM42EP
1. Place large back log (log 1) onto grate
making sure notches rest over grate (see
Figure 27).
2. Insert lower end of log 2A between rst
two grate ngers and position upper end
into notch on front of log 1. See Figure 27.
Place log 2B on front right side of grate as
shown in Figure 27.
3. Place log 3 into notch on top left of log 1,
resting lower end on left two grate ngers
(see Figure 28).
4. Place upper end of log 4 into notch on
log 1 as shown in Figure 28. Rest lower
end of log 4 on the middle grate nger as
shown in Figure 29.
5. Place upper end of log 5 into notch on top
inner right of log 1 (see Figure 29). Rest
lower end of log 5 on middle grate nger
as shown in Figure 30.
6. Place log 6 into notch on top right of log
1 (see Figure 29). Rest lower end of log
6 on top of log 2B (see Figure 30).
As an option to enhance the look of the hearth,
you may place lava rock provided around front
and sides of burner pan.
NOTICE: Donotput lavarock
insidetheburnerpanoraround
theairmixertting.Placinglava
rock inside the burner pan or
blockingtheopeningsofthepro-
pane/LPairmixercouldcause
performanceproblems.
Figure 27 - Installing Logs 1, 2A and 2B
Log 2A
Log 2B
Log 1
Notch
Figure 28 - Installing Logs 3 and 4
Log 4
Log 3
Log 1
Notches
Figure 29 - Installing Logs 5 and 6
Figure 30 - Logs Installed for M42E,
M42EP, VM42E and VM42EP Models
Log 6
Log 5
Notch
Log 1
Log 2B
 previous next