Filter
Top Products
34
Problem Solution
Parent unit beeps and displays
low battery icon
on screen
If the low battery icon with a 1 is displayed, the battery pack in
parent unit is weak or dead. Use AC adaptor/charger to charge
the battery and use as a power source.
If low battery icon with a 2 is displayed, the battery pack in
camera is weak or dead. Place the camera in the docking
station to charge the battery and use as a power source.
Camera power L.E.D.
does not light
Camera power is off. Turn camera power on.
Loose power cord connection and camera power is off. Check
docking station power cord plug-to-outlet connection.
No power to wall outlet and camera power is off. Make sure
light switch that controls power flow to wall outlet is on.
Power is off because circuit breaker for baby’s room is off.
Make sure house fuses and circuit breakers are on.
You can hear conversations or
sounds from other homes
There is signal interference due to other nursery monitors on
same channel or cordless telephone use. You may need to pair
the parent unit and camera. Remove the parent unit battery
door and press the pairing button with a paperclip. The power
button will blink when the pairing button is released. Then, turn
over the camera and press the pairing button with a paperclip.
The power button will flash on both units after the pairing
button is pressed. When the pair is complete, the power button
on both units will go back to solid.
Problems & Solutions
Hint: If, after checking all of these solutions, you believe that your camera power cord or
AC adaptor are damaged, please contact Fisher-Price
®
.