Filter
Top Products
20
10
Camera Wall Mount Installation
IMPORTANT! Make sure the cord is taught between the camera docking station and cord wrap. Excess cord
can form loops or extend into the crib and present a strangulation hazard.
• Extend the docking station power cord straight down the wall to the cord wrap.
• Wrap the docking station power cord around the cord wrap, leaving just enough to reach the wall outlet.
Make sure there is no slack in the docking station power.
• Slide the lever on the front of the cord wrap and thread the docking station power cord through the groove
in the front of the cord wrap. Make sure the docking station power cord is fully inserted in the groove.
• Plug the docking station power cord into the wall outlet.
IMPORTANT! Make sure
there is no slack in the
cord. Use the cord wrap.
Groove
Cord Wrap
Lever