Filter
Top Products
12
Testing Sound/Video Reception
• Place the parent unit in the room where you intend to use it.
• Press the power button on the front of the parent unit to turn power ON. The button lights.
• Adjust the parent unit orientation or location for best reception.
• When sound is picked up by the parent unit, the sound lights will turn on.
- One or two lights indicate quieter sounds.
- Three or more lights indicate louder sounds.
• If you cannot see an image on the video screen, adjust the camera location or camera angle.
Hint: Make sure you are not covering (with your hand) the parent unit internal antenna.
• Repeat this procedure in every room you plan to use the camera and parent unit.
Parent Unit
Power Button
Sound Lights
Internal Antenna