Filter
Top Products
7
7
A
A
B
ASSEMBLING THE BACKGUARD
It is mandatory to install the backguard.
Assemble the backguard as shown in fi gure 1.3:
• Screw the 2 screws “A” interposing the spacers.
• Screw the central screw “B”.
1
Fig. 1.3
GAS AND ELECTRIC CONNECTION
Fig. 1.2
Dotted line showing the position
of the range when installed
Area for
ELECTRICAL
connection
Area for
GAS connection
B
A
B
C
C
Ref. inch mm
A 5” 7/16 - 6” 1/8 (*) 138 - 155.5 (*)
B 14” 3/8 365
C 37/64” 14.5
(*) : Depending on feet regulation