Filter
Top Products
– 8 –
48,&.9,(:2)6<67(0)81&7,216
REMOTE PHONE CONTROL OPERATION
To remotely disarm:
--------------------------
+
[1]
To remotely arm in AWAY mode:
---------
+
[2]
To remotely arm in STAY mode:
----------
+
[3]
To remotely arm in AWAY or STAY mode with NO DELAY:
+
[2] or [3] + [0]
To remotely activate X-10 devices 1-6:
---
[#] + [4] + device no
.
To remotely activate X-10 devices 7 & 8:
+
[#] + [4] + device no.
To remotely deactivate X-10 devices 1-6:
[#] + [7] + device no.
To remotely deactivate X-10 devices 7 & 8:
+
[#] + [7] + device no.
To remotely bypass a zone:
------------------
+
[6] + zone no.
To remotely activate forced bypass:
-------
+
[6] + [#]*
To remotely check system status:
----------
[*]
To hang up:
-------------------------------------
+
[9]
*If forced bypass was enabled by your installer.
OTHER FUNCTIONS
To set the time and date:
---------------------
+
FUNCTION
+
[63]
To set scheduling:
-----------------------------
+
FUNCTION
+
[64]
To activate X-10 devices 1-6:
---------------
FUNCTION
+
LIGHTS ON
+
device number
To activate X-10 devices 7 & 8:
------------
+ FUNCTION
+
LIGHTS ON
+
device number
To deactivate X-10 devices 1-6:
------------
FUNCTION
+
LIGHTS OFF
+
device number
To activate or deactivate X-10 dev. 7 & 8:
+ FUNCTION
+
LIGHTS OFF
+
device number
To add a user code:
--------------------------
**
+
CODE
+
user no. (02-08)+ user code
To delete a user code
(except Master Code)
:-
**
+
CODE
+
user number
(
02-08)
To turn Test mode on:
------------------------
+
TEST
To turn Test mode off:
-----------------------
+
OFF
To use the defined AUX function:
----------
Press and hold
AUX key 2 seconds (4 beeps)
+
To send message to pager:
-------------------
Press and hold
AUX key 2 seconds (4 beeps)
** Only the master code can be used to add or delete another user code.