Filter
Top Products
– 12 –
6<67(029(59,(:
About the Display and Indicators
Display Definitions
(for other displays, see
Trouble Messages
)
ALARM
AWAY
INSTANT
STAY
FIRE
REC MESSAGE
BYPASS
FAULT
CHIME TEST
LOW BAT AC
ALARM:
Appears when the system is armed and an intrusion has been detected (also appears
during a fire alarm or audible emergency alarm). Accompanied by the protection zone
that is in alarm.
AWAY:
All burglary zones, interior and perimeter, are armed.
INSTANT:
Entry delay is turned off.
STAY:
Perimeter burglary zones, such as protected windows and doors, are armed.
ReadyGuard-REN is not intended for UL985 Household Fire applications unless a 24-hour backup
battery (P/N LYNXRCHKIT-HC) is installed.
FIRE: Appears when a fire alarm or fire fault is present. Accompanied by a display of the zone
that is in alarm.
LOW BAT: Low battery condition in a wireless sensor (if zone number is displayed) or low system
battery (if no zone number is displayed). If 00 is displayed, a wireless keypad (5827) has
a low battery condition.
AC: Appears when AC power is present. If not displayed, the system is operating on backup
battery power.
CHIME: Appears when the Chime feature is activated.
TEST: Appears when the system is in Test mode.
REC: Appears when the system is in Recording mode.
MESSAGE: Appears when a message has been recorded and has not yet been played back.
BYPASS: Appears when one or more burglary protection zones have been bypassed.
FAULT: Appears at any time a malfunction is discovered in the system; or any time an open is
detected in a fire zone; or when a fault in a day/night burglary zone is discovered during
a disarmed period. Accompanied by a display of the zone number in trouble.
PH: Appears in place of the clock when the speaker phone mode is active.
PC: Appears during a remote phone control session.
LED Meanings
ARMED LED: ON = System armed
(Red) OFF = System disarmed
Blinking = System armed, but a fault exists
Blinking alternately with READY LED = AVM (VOX or Talk) or speaker phone mode
is active
READY LED: ON = System disarmed, ready to arm
(Green) OFF = System armed
Blinking = System disarmed, not ready to arm (a fault exists)
Blinking alternately with ARMED LED = AVM (VOX or Talk) or speaker phone mode
is active.