Filter
Top Products
– 47 –
Using Schedules (cont’d)
Schedules are comprised of an arming (closing) time window and a
disarming (opening) time window. A time window is simply a defined
period of time, at the end of which arming or disarming will occur.
Before programming a temporary schedule, use a worksheet similar
to the one below to plan your schedule. This will make it easier when
actually programming the schedule.
Arm/Disarm Mon Tue Wed Thu Fri Sat Sun
Windows
Disarm Window
Start Time HH:MM
Stop Time HH:MM
Arm Window
Start Time HH:MM
Stop Time HH:MM
Programming Temporary Schedules
Temporary schedules only affect the partition from which it is
entered. Temporary schedules can be reused at later dates simply by
scrolling (by pressing #) to the DAYS? prompt (described below) and
activating the appropriate days. This should be considered when
defining daily time windows. Note that only users with authority level
of manager or higher can program temporary schedules.
To program temporary schedules:
1. Enter your security code.
2. Press the #
key followed by 81.
3.
The following prompts will appear.
Technical Manuals Online! - http://www.tech-man.com