Filter
Top Products
– 20 –
Security Codes & Authority Levels (cont’d)
PART. 1 A0
*
WHSE
USER 003 AUTH=3G.
When all partitions have been displayed, the
keypad will scroll through the partition(s) to
which access has been assigned, and will
display the user number, authority level and
global arm option for each. The “G” after the
authority level indicates that the global arm
feature is active for this user in the displayed
partition. The "*" indicates the partition from
which this user can be changed or deleted.
The "." at the end of the second line indicates
that this user sends open/close reports.
Open/close reporting is automatically active
for any users added by you, if you have
open/close reporting active.
Limited Use User(#84 Command)
To set the usage count for users with authority level 7, enter code + #
84. The following prompt will appear.
CODE USE LIMIT
01-15 00=QUIT
Enter the number of times these users will have access to the system.
These codes automatically expire (but the codes are not deleted) after
the number of uses. To reactivate the codes, simply enter [#] + 84 and
set a new usage limit.
To Change a User's Code
CODE
1. Enter Master or Manager code and press the 8 key + user
number to be changed.
2. Enter the new code for that user.
Technical Manuals Online! - http://www.tech-man.com