Filter
Top Products
– 14 –
Entry/Exit Delays
General Information
Your system has preset time delays, known as exit delay and entry
delay. Whenever you arm your system, exit delay gives you time to
leave through the designated exit door without setting off an alarm.
Exit delay begins immediately after entering any arming command,
and applies to all modes of arming protection. If programmed, a slow
beeping will sound throughout the exit delay period.
Entry Delay gives you time to disarm the system when you reenter
through the designated entrance door. But the system must be
disarmed before the entry delay period ends, or an alarm will occur.
The keypad will beep during the entry delay period, reminding you to
disarm the system. You can also arm the system with no entry delay
at all by using either INSTANT or MAXIMUM arming modes. These
modes provide greater security while on the premises or while away
for extended periods of time. See your installer for your delay times.
Technical Manuals Online! - http://www.tech-man.com