Filter
Top Products
Maintaining Your System
(cont’d)
- 44 -
Important:
Use only batteries recommended by your installer as
replacement.
Silencing Low Battery Warning Tones at the Keypad
You can silence the keypad’s warning tones by pressing the
1
key,
OFF
but the keypad's
LOW BATTERY
message display will remain on as
a reminder that you have a low-battery condition in one or more of
your sensors. When you replace the weak battery with a fresh one, the
sensor will send a "good battery" signal to the control as soon as the
sensor is activated (opening/closing of door, window, etc.), causing the
LOW BATTERY
display to turn off. If the sensor is not activated, the
display will automatically clear within approximately 1 hour.
Routine Care
•
Treat the components of your security
system as you would any
other electrical equipment. Do not slam sensor-protected doors or
windows.
•
Keep dust from accumulating on the keypad and all protective
sensors, particularly on motion sensors and smoke detectors.
•
The keypad and sensors should be cleaned carefully with a dry soft
cloth.
Do not spray water or any other fluid on the units.