Filter
Top Products
- 20 -
Arming All Protection
(With Entry Delay OFF)
Using the 4 Key
MAXIMUM
Use this key when the premises will be vacant for an extended period
of time, such as during a vacation, or when no one will be moving
through protected interior areas.
When armed in MAXIMUM mode, the system will sound an alarm if a
protected door or window is opened, or if any movement is detected
inside the premises. You may leave through the entrance door during
the exit delay period without causing an alarm, but an alarm will be
sounded as soon as someone re-enters.
Close all protected perimeter windows and doors before
arming
(see
Checking for Open Zones
section). The green READY
indicator (if present) on the keypad should be lit if the system is ready
to be armed.
1.
+
4
(Security Code)
MAXIMUM
Enter 4-digit security code, then
press the MAXIMUM key.
Example: Press 7
2 9 6 then
4
or, for quick arming
(if enabled):
Press the [#] key followed by the
MAXIMUM key
.
2.
ARMED
*
MAXIMUM
*
You may exit now
Listen.
The keypad beeps twice, or beeps
continuously if exit warning has been
programmed for your system, and
displays the
ARMED MAXIMUM
message (
AWAY/INSTANT
on fixed-word
keypads). The red ARMED indicator also
lights.
The
You may exit now
portion of the
message disappears when the exit delay
expires*.
*
Refer to the note at bottom of page 19 dealing with the
automatic Exit Restart feature.