Filter
Top Products
- 17 -
Arming Perimeter and Selected Interior Zones
(with Entry Delay ON)
Using the 3 Key to Arm Night-Stay
STAY
Use this key when you are staying home, but would like increased
security by arming preselected interior zones.
When armed in NIGHT-STAY mode, the system will sound an alarm if a
protected window or door is opened, or if one of the selected interior zones
is faulted. You may re-enter through the entrance door without causing
an alarm
IF
one of the selected perimeter zones is not faulted, but the
system must be disarmed within the entry delay period or an alarm will
occur.
Close all protected perimeter windows and doors before arming
(see
Check for Open Zones
section). The green READY indicator on the
keypad should be lit if the system is ready to be armed.
1.
+
3
+
3
(Security Code)
STAY
STAY
Enter 4-digit security code, then
press STAY key twice.
Example: Press
7 2 9 6 ,
then
3
3
or, for quick arming
(if enabled):
Press the [#] key followed by the
STAY key twice,
or
press and hold
the [C] button
(if available).
2.
***
NIGHT-STAY
***
You may exit now
Listen for 3 beeps.
The keypad beeps three times and
displays the
NIGHT-STAY
message.
The
You may exit now
portion of the
message disappears when the exit
delay time expires.
You can restart the exit delay at any time after arming in STAY mode by
pressing the
✴
key. This is useful if you wish to open the entry/exit door
to let someone in or out after arming the system without having to
disarm the system and then re-arm it again*.
*
Refer to the note at bottom of page 19 dealing with the automatic Exit Restart feature.