Filter
Top Products
8
Setting Up
Your Model 1501 System
GENERAL PRECAUTIONS
Use only the two power supplies provided with the system.
Unplug the power supplies when the system is not in use for extended time
periods.
Do not place any of the equipment near a radiator, vent, or other place where it
might be exposed to heat, moisture, dust, vibrations or strong magnetic fields.
Place the monitor in a well-ventilated location to prevent overheating.
Do not attempt to repair the equipment. Contact a qualified technician or the
dealer for service. Any change or modification may damage the equipment and
invalidate the warranty.
ASSEMBLING AND CONNECTING THE MONITOR- DVR
1 Connect the mouse to the USB port on the monitor-DVR.
2 Place the monitor-DVR on its base and snap it into locked
position.
3 Connect the cable of the power supply adapter to the DC
12V connector on the bottom of the monitor-DVR. Plug
the power supply into a receptacle outlet.
The POWER indicator light on the front panel will light when
power is applied. When system initialization (boot up) is
complete, the image from each active camera will display on the
quad-screen monitor.