Filter
Top Products
6 Installation (for qualified installers only)
Travis Industries 4081229 100-01207_000
Packing List
• Wall Switch with Plate
• Bulb Pack
•
2 Bags of Crushed Glass
• Junction Box (with receptacle, romex clamp and cover)
• Optional Remote (receiver and transmitter)
Additional Items Required
• Glass Frame (SKU 95000964) NOTE: Two glass frames are required for double-sided installations.
• Candle Set (Natural
95000961, Stone 95000962, or Frosted 95000963)
• Electrical Equipment (min. 14 gauge, grounded line)
Unpacking the Fireplace
Front and Back Panels
The fireplace is shipped with steel panels on the front and back. We recommend that you keep these
panels in place to protect the interior of the fireplace and to help keep the fireplace square during
installation.
Mirrored or Black Panel Behind Candles
NOTE: This applies to single-sided fireplaces only.
This fireplace may be installed with a mirrored background or black background behind the candles.
Instructions for configuring the mirrors is on page 13. Before securing the fireplace in position, make sure
the background is correctly configured - you can not remove the back panel once the fireplace is in
position.
NOTE: Because the fireplace is two-sided, you may wish to reverse the position of the panels for the
desired configuration.
Recommended Installation Procedure
• Frame the opening for the fireplace.
• This fireplace is designed to accommodate 1/2" drywall (see "Nailing Brackets" on page 9 for details).
Secure the fireplace to the framing.
• Install the electrical line.
• Install the drywall.
• Install the facing or mantel (if applicable).
• Finalize the installation (see page 13).
Fireplace Placement Requirements
• The fireplace sides and back may contact the framing and building material (insulation, etc.).
• Fireplace must be installed on a level surface capable of supporting the full weight of the fireplace
and candles.
• If installed on an exterior wall, the wall must be insulated to meet local requirements (use insulation
board if necessary).
• The fireplace glass frame must be removable after installation. We recommend the frame be
installed overlapping the facing to better facilitate removal.