Filter
Top Products
7
How to Hang Your Ceiling Fan
1. Securely attach the ceiling junction box acceptable for
ceiling support into the building structure. Junction box
is not supplied with the fan. (Figure 2)
ʆ
WARNING
It is critical that the outlet box and the screws are
securely anchored to the building structure and capable
of withstanding a load of at least 50 lbs. Failure to verify
that the screws are properly installed could result in the
fan falling. (Figure 2)
Figure 1
ʆ
WARNING
To avoid possible electrical shock, be sure electricity is
turned off at the main fuse box before hanging.
NOTE: If you are not sure if the outlet box is grounded,
contact a licensed electrician for advice, as it must be
grounded for safe operation.
ʆ
WARNING
The fan must be hung with at least 7´ of clearance from
floor to blades. (Figure 1)
Floor
Ceiling
No
less than
7 ft
Figure 2
Figure 3
NOTE: Supply wires
omitted for clarity
Outlet Box
Ceiling Bracket Assembly
2. Remove the four screws and hex nuts from the ceiling
bracket assembly. Retain the screws and hex nuts for later.
(Figure 3)
3. Using the ceiling junction box screws provided with the
ceiling junction box, securely attach the ceiling bracket to
the ceiling junction box as shown. (Figure 4)
4. Hang the Motor Assembly as shown. (Figure 5) You can
now proceed with the electrical wiring of your fan.
Junction Box
Motor Assembly
Screws (2)
Figure 4
Figure 5