Filter
Top Products
EVERFOCUS ELECTRONICS CORPORATION
Diagram 26
¾ To stop recording simply press the Stop button.
Please Note: When the Hard Drive is full, the DVR will either stop
recording automatically or overwrite from the beginning of the hard drive.
This is all dependent on what was set in the record setting (see page 25).
Motion Recording Setup
¾ Assuming you have completed the setup options in Chapter 1 and 2. Log into
the DVR menu by pressing the Menu button. This method is highly
suggested for Motion Recording.
Turning the jog dial clockwise or counter clockwise will allow
you to scroll through the different menu setup options
¾ To use this feature, turn ON all the Operations under Alarm record setting
menu and Motion setting menu. Then go to Record Setting Menu (See Page
25) change the Alarm recording speed and quality that best fits your
application. Please note: your alarm recording speed is basically gonna be your
motion recording speed. Also turn pre alarm and permanent record ON and
select the Permanent record Speed to 0.01 IPS from the same page.
¾ Exit the menu by pressing the Menu button twice and DVR set to record in
motion recording mode.
46