Filter
Top Products
Changing S ewing Directions
1. Stop the machine, and turn the balance wheel toward you to
bring the needle down into the fabric. Raise the presser foot.
3. Lower the presser foot and continue sewing.
2. Pivot the fabric around the needle to change direction as
desired.
Fastening Seams
1. For fastening the ends of seams, press in the reversing
button and sew several reverse stitches.
2. To remove the fabric, raise the presser foot and draw the
fabric away from you.
3. Cut threads on thread cutter at the rear of presser bar or
with a pair of scissors.
Leave about 15 cm (6 inches) of hread hanging from the
needle eye.
thread cutter
TRIPLE STRE TCH STITCH
(Model 374/373/372/372H)
If you wish to sew stretch fabrics, this is the right stitch to avoid thread breaking. This is also very suitalbe
for seams that need great strength,e.g.crutch seams or pocket seams.
TR IPLE S TR AIGHT S TR ETCH STITCH
TRIPLE ZIGZAG S TR ETCH STITCH
Model 377
Model 373/372/372H
zigzag foot
Model 374
zigzag foot
Pattern selector
Presser foot
Stitch length dial
S.S.
M( ) 8( )
Note: * Use a STR ETCH needle.
The blue tipped shank needle effectively prevents
skipped stitches.
12
Model 377
Model 373/372/372H
zigzag foot
Model 374
zigzag foot
Pattern selector
Presser foot
Stitch length dial
S.S.
O( ) 7( )