Filter
Top Products
Figure 64: Bushing Locations.
Surround is
removed for
clarity.
Figure 65: Bushing and Hook
Close-Up.
INSTALLATION:
Lift the trim upright in front of the replace with the four (4) hooks pointing towards the replace. Slide
the hooks over their corresponding bushings (see Figures 64 & 65). Ensure the hooks are secure before
releasing the trim. The surround should be wiped with a damp cloth periodically.
REMOVAL:
Lift the trim straight up in order to unhook the notch on the hooks from the bushing. Pull the trim away
from the replace. Place the trim where it will not be damaged.
Figure 63: Installing Surround Corners, Keystone, & Covers.
31
11. Center the keystone
over the gap at the top
of the trim and slide it
into place. Slide the
side covers over the
bottoms of the sides
so the cover will be as
low as the trim (see
Figure 63).
Secondary Installation
IMPORTANT: The trim panels or surrounds must not seal ventilation openings in the replace.