Filter
Top Products
7
Figure 2: Windsor Dimensions.
27
1
/8"
(689mm)
25
3
/4"
(653mm)
25
7
/8"
(659mm)
15
3
/8"
(390mm)
14
1
/4"
(360mm)
24
1
/8"
(614mm)
Installation
DIMENSIONS & SPECIFICATIONS:
Table 1: Windsor Specifications.
Classification Testing Standard Description
Class I IP-20 EN14785:2006 Residential Wood Pellet Heater
Voltage Current Frequency
220 - 240 V 2.0 - 2.3 Amps 50 Hz
Maximum Power Requirement Fuel type Calorific value of Pellet used
525W (1793 BTU/hr) wood pellets - 6mm (”) dia. ≥ 5.10 kWh/kg (≥ 8000 BTU/lb)
Maximum Flue Gas Temperature Mean Flue Gas Temperature Mean Flue Gas Temperature (Reduced)
230°C (446°F) 180.5°C (357°F) 128.5°C (263°F)
Nominal Heat Output CO emissions from Combustion Energy Efficiency
6.9 KWh (23544 BTU) 0.035% 82.6%
Reduced Heat Output CO emissions from Combustion (Reduced Output) Energy Efficiency (Reduced Output)
2.3 KWh (7848 BTU) 0.052% 77.3%
CO
2
at Nominal Output Nominal Fuel Consumption Rate Unit with Full Hopper
8.16% 1.65 Kg/hr (3.64 lb/hr)* ~ 151kg (333lb)
CO
2
at Reduced Output Fuel Consumption Rate (Reduced Output) Hopper Capacity
4.142% 0.59 Kg/hr (1.30 lb/hr)* ~ 20kg (45lb)
*Note: Consumption will vary with the type of fuel used.