Filter
Top Products
Page 2320248-2-0806
23. Position blower shield side beneath left flange on burner
assembly. Align clearance hole on left flange of burner assembly
with screw hole on blower shield side. Attach burner assembly
to blower shield side with one (1) 10 x 1/2" screw. (See Figure
3 for not installed or Figure 4 for installed)
24. Remove 8 x 1/4" screw located on left, front of valve cover on
burner assembly. Insert blower shield front adjacent to blower
motor and blower shield side. Align clearance hole on blower
shield front with left, front screw hole on valve cover. Attach
blower shield front to valve cover with 10 x 1/2" screw. (See
Figure 3 for not installed or Figure 4 for installed)
25. For fireplace that is not installed, replace burner assembly
into interior of fireplace.
26. Place inner casing in front of outer casing.
27. Insert inner casing assembly into outer casing.
Figure 4
Figure 3