Empire Comfort Systems DV-35-2SG Furnace User Manual


 
12434-3-0903Page 16
Cleaning
The blower wheel will collect lint and could require cleaning
once a year. If the air output decreases or the noise level
increases, it indicates a dirty wheel. Complete removal of the
wheel and scrubbing it with a brush under flowing water is
recommended.
Oiling
The blower motor has an oil hole located on each end of the
motor. Use #20 motor oil only. It is best to oil the motor several
times during the heating season using 2 or 3 drops each time. If
the motor fails to start and hums, it could be a tight bearing due
to lack of oil. This may be corrected by pouring kerosene in the
oil holes, allowing to stand for a few hours and then oiling
properly.
PARTS LIST
Index Part
No. No. Description
1 R-2090 Motor
2 632016 Motor Cushion
3 RH-036 Motor Support
4 642030 Blower Wheel
5 RH-710 Blower Housing Assembly
6 9120106 Fan Control Switch
7 872087 Heyco Bushing
8 DV-806 Switch Box
9 DV-807 Switch Box Cover
10 R-2091 Wire Assembly 19" (483mm)
11 8720161 Heyco Bushing
12 R-2099 Cord Set 72" (1.83m)
OPTIONAL BLOWER INSTALLATION INSTRUCTIONS (continued)
-3-0903
Empire Comfort Systems, Inc.
Nine Eighteen Freeburg Ave.
Belleville, Illinois 62220-2623
PH: 1-618-233-7420
PH: 1-800-851-3153
FAX: 1-618-233-7097
FAX: 1-800-443-8648
E-MAIL: info@empirecomfort.com
WEB SITE: www.empirecomfort.com