Copyright © 2003 Net Safety Monitoring Inc.
Printed in Canada
This manual is provided for informational purposes only. Although the information contained in this manual is
believed to be accurate, it could include technical inaccuracies or typographical errors. Changes are, therefore,
periodically made to the information within this document and incorporated without notice into subsequent
revisions of the manual. Net Safety Monitoring Inc. assumes no responsibility for any errors that may be
contained within this manual.
This manual is a guide for the use of a Toxic gas detector and the data and procedures contained within this
document have been verified and are believed to be adequate for the intended use of the detector. If the
monitor or procedures are used for purposes other than as described in the manual without receiving prior
confirmation of validity or suitability, Net Safety Monitoring Inc. does not guarantee the results and assumes
no obligation or liability.
No part of this manual may be copied, disseminated or distributed without the express written consent of Net
Safety Monitoring Inc.
Net Safety Monitoring Inc. products, are carefully designed and manufactured from high quality components
and can be expected to provide many years of trouble free service. Each product is thoroughly tested,
inspected and calibrated prior to shipment. Failures can occur which are beyond the control of the
manufacturer. Failures can be minimized by adhering to the operating and maintenance instructions herein.
Where the absolute greatest of reliability is required, redundancy should be designed into the system.
Net Safety Monitoring Inc., warrants its sensors and detectors against defective parts and workmanship for a
period of 24 months from date of purchase and other electronic assemblies for 36 months from date of
purchase.
No other warranties or liability, expressed or implied, will be honored by Net Safety Monitoring Inc.
Contact Net Safety Monitoring Inc. or an authorized distributor for details.