August 2015
2
Quick Start Guide
NOTICE
This guide provides basic guidelines for the Smart Wireless Gateway. It does not provide
instructions for diagnostics, maintenance, service, or troubleshooting. Refer to the Smart
Wireless Gateway Reference Manual (document number 00809-0200-4420) for more
information and instructions. This guide and the manual are available electronically on
www.emersonprocess.com.
Explosions could result in death or serious injury.
Installation of this device in an explosive environment must be in accordance with the
appropriate local, national, and international standards, codes, and practices. Review the
Product Certifications section for any restrictions associated with a safe installation.
Avoid contact with the leads and terminals. High voltage may be present on leads can cause
electrical shock.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
conditions:
This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause
undesired operation.
This device must be installed to ensure a minimum antenna separation distance of 20 cm
from all persons.
Contents
Wireless considerations . . . . . . . . . . . . . . . . 3
General considerations
. . . . . . . . . . . . . . . . . 4
Initial connection and configuration
. . . . 5
Physical installation
. . . . . . . . . . . . . . . . . . .11
Connect to the host system . . . . . . . . . . .16
Software installation (optional) . . . . . . . .17
Verify operations
. . . . . . . . . . . . . . . . . . . . . .18
Product specifications
. . . . . . . . . . . . . . . . .19
Product Certifications
. . . . . . . . . . . . . . . . .22
00825-0200-4420_RevFE.fm Page 2 Monday, August 10, 2015 3:25 AM