Filter
Top Products
GENERAL INFORMATION :
The ULTRA FLAME is a high efficiency fireplace gas insert with an input rating of 30
000 Btu/h with natural gas and 26 000 Btu/h with propane. It features a millivolt valve
with a constant pilot. This lets you choose between a wall mounted switch, a wireless
remote control to turn on or off the main flame at will. This also means that your
ULTRA FLAME gas valve is not connected to any exterior electrical supply and that
your appliance will continue to heat your house in the event of a power failure.
For added efficiency, we included a 140 CFM blower with speed control and thermo-
switch. Your fan will therefore turn itself on or off automatically, if you so desire.
The ULTRA FLAME should only installed in a existing masonry or prefab fireplaces.
The installation must be in accordance with local building codes or, if inexistant, with
current CAN/CGA B149.1 & B149.2 , ANSI Z 223.1 installation codes for gas appliance.
The gas insert must be electrically grounded in accordance with the current electrical
Codes.
Read these instructions and consult your local building authorities before installing this
appliance. Install the unit and its venting system only as described in these instructions.
KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
This gas insert has been tested by WARNOCK HERSEY according to the CAN-CGA-
2.22M86 standard, and Z21.50, 50A, 50B American standard.
2