Filter
Top Products
INSTALLATIONS :
1. Screw the air deflector on the unit as shown using three #10 x 1/2 metal screws.
2. Bring the face plate in position on the gas insert taking care to slip the air
deflector between the top louver and the bottom of the top piece. Secure using
four #10 x 1/2 metal screws (D).
3. Connect the slip on the terminals on the rocker switch making sure the wires are
in pairs by color. The green wires lead to the valve and the yellow to the fan.
WARNING : Do not connect two wires of different color on the same switch, this
would result in damage to the valve and possible harm to the operator.
15