Filter
Top Products
Draining
Storage below temperature 0°C (32°F) and maintenance requires
that the purifier is emptied.
1. Check that the water from the drain hose is led out under
the caravan.
2. Shut off the water purifier with the ON/OFF button.
3. Disconnect the power supply to the water purifier with
the safety switch in the central electrical unit.
4. Press the Release button at the back of the purifier, see
fig. B and remove the top cover, see fig. C.
5. Close the shut off valve on the inlet hose.
6. Open the drain valve by lifting up the release button (1)
and pulling the valve out (2), see fig. D.
7. Open the filter housing lid by turning it as indicated on
the lid, see fig. E.
8. When the water purifier is empty, close the valve by lift-
ing up the release button and pushing in the valve (3),
see fig. D.
Note! Ensure that the edge of the catch really locks the
drain valve in the inner position.
8
B
C
D
E
MAINTENANCE
1
2
3