Filter
Top Products
ENGLISH 13
Battery-Powered Systems Installation Guidelines
OPTIONAL:
INSTALLING 120VAC OUTLETS
INSIDE THE SLEEPER
If so equipped, the system will have 120VAC outlets
that can be installed inside the sleeper for accessory
use. The outlets may be installed anywhere inside
the sleeper, however, they should be installed in an
area that makes sense for the loads the driver will be
applying (i.e., probably near one cabinet or the other).
The outlets should be installed with the Y-cable
connection to the main cable between the inverter
and the HVAC unit.
OPTIONAL:
INSTALLING SHOREPOWER CONNECTION
The shorepower connection is only available with the
inverter/charger.
The shorepower connection should be installed
preferably on the driver’s side of the truck. If the
driver’s side of the truck is not in reach of the battery
box in which the inverter/charger is mounted, then
the connection should be installed as close to the
inverter/charger as possible (Fig. 8). This will probably
be in the side of the battery box in which the inverter/
charger is mounted.
Figure 8 – Shorepower connection installed