Filter
Top Products
ENGLISH12
Battery-Powered Systems Installation Guidelines
TESTING THE ALTERNATOR
Follow the manufacturer’s recommendations to test
the alternator and regulator functions. Instructions are
in the regulator manual.
You will need a volt meter.
There is a small door on the regulator. Remove the
screw and twist the door to see the display.
WIRING THE 120VAC POWER
TO THE HVAC UNIT
Follow the directions and wiring diagrams in your air
conditioner installation manual.
The connection of the 120VAC cable to the inverter
should be done with either the extension cable
or the Y-cable assembly. Dielectric grease should
be applied to any connections outside of the cab
structure. “Splicing” outside of the cab without taking
precautions for waterproofing is not permissible and
may void your warranty.
Only as many extensions as required should be
used.
Cables should be routed and clipped securely so as
to prevent chafing and rubbing.
The connection at the HVAC unit should be done with
the supplied plug.