Filter
Top Products
18 www.dimplex.com
Maintenance
To access the upper light bulb
area:
① Remove front glass assembly.
② Upper bulbs are located in the
upper left and upper right corners
of replace (Figure 8).
③ Remove the upper light cover
for each bulb (two (2) Philips
screws each).
④ Unscrew bulbs counter
clockwise.
⑤ Insert new bulbs.
⑥ Re-install upper light bracket.
⑦ Replace glass assembly.
Glass Cleaning
The glass is cleaned in the factory
during the assembly operation.
During shipment, installation,
handling, etc., the glass may
collect dust particles; these can
be removed by dusting lightly with
a clean dry cloth.
To remove ngerprints or other
marks, the glass can be cleaned
with a damp cloth. To prevent
scratching, do not use abrasive
cleaners or spray liquids on the
glass surface.
Fireplace Surface
Cleaning
Use a cloth dampened with
warm water only to clean painted
surfaces of the electric replace.
Do not use abrasive cleaners.