Operation
Press the Flame/Heat On/Off 7.
button
to turn the Flame/
Heat function on.
Frequency Interference
If the replace does not respond
properly to the remote control,
the remote operating frequency
may have to be reset. The
remote control can send another
frequency code to the remote
control reciever to eliminate
interference.
① Simultaneously press the
“Temperature Down” button and
the “Flame Speed Down” button
on the remote control (Figure 6).
② “COD” will appear in place of
the sleep timer digits.
③ Release the “Temperature
Down” button and the “Flame
Speed Down” button.
④ Press the Initialization Button
on the unit (Figure 4C).
⑤ Press the Flame/Heat On/Off
Button
button on the remote.
Your remote will now
have a different frequency
communicating with the replace.
Remote Control Functions
(All letter references are to Figure 6)
B. Set Temperature
Press F button
to turn replace
on.
Press H to raise thermostat.
Press G to lower thermostat.
Press both H and G to change °F
to °C.
C. Dimmer
Press the F button to turn the
Flame/Heat on.
Repeatedly press the J or I button
to decrease or increase the
brightness of the upper lights.
D. Flame Speed
Press the F button to turn the
Flame/Heat on.
Press the L button to increase the
speed of the ame.
Press the K to decrease the
speed of the ame.
E. Sleep Timer
The Sleep Timer automatically
shuts off the replace after a
preset time (from 30 minutes to 8
hours).
Press the F button
to turn the
replace on.
