Filter
Top Products
5
106022
OWNER’S MANUAL
Pallet
Wood
Bolted to
Bottom of
Stove
Body
STOVE BODY ASSEMBLY
1. Lift off corrugated box enclosing stove
body crating.
2. Remove all screws fastening the wood
frame enclosure. Spread wood frame open
and lift away from plastic-bagged stove
body. The bottom pieces of pallet wood
will remain bolted to the stove body.
3. Remove plastic bag from stove body.
4. Remove back panel from stove and dis-
card (see Figure 6). Use an adjustable
wrench or a 10 mm socket. Remove six
(6) bolts and washers. Keep bolts and
washers to attach brackets when install-
ing fireplace insert into stove body.
Dispose of back panel.
5. Remove all contents from inside stove
cavity. Contents include:
(1) - Stove bottom
(4) - Legs with leg leveler bolts
(1) - Bottom door
(1) - Top grate
(1) - Hardware kit bag with fasteners
6. Carefully lay stove body on back to at-
tach bottom components to stove body
(see Figure 7). Rest stove on drop cloth or
blanket to avoid scratching stove edges.
Figure 7 - Laying Down Stove On Side
Figure 8 - Removing Pallet Wood From
The Bottom of The Stove
Figure 6 - Removing Back Panel
Pallet Wood
Bolt
Pallet Wood
Bottom Of
Stove Unit
Front
Front of
Stove
Unit
Top of Stove Unit
Front of Stove Unit
Stove
Unit
Drop
Cloth/
Blanket
FREESTANDING
FIREPLACE
ASSEMBLY
Figure 4 - Clearance for Corner Installation
Figure 5 - Freestanding Fireplace Bottom
Dimensions
26"
25"
Front
7. Remove remaining pallet wood at-
tached to bottom of stove body (see
Figure 8). Use an adjustable wrench to
remove bolts.
8. Fasten each leg to stove with four (4)
M8 x 1.25 - 20mm bolts. Use a flat
washer and lock washer with each bolt.
Tighten bolts into threaded holes on
stove body (see Figures 9 and Figure
10, page 6). Use an adjustable wrench
or a 12mm socket.
9. Fasten stove bottom to stove with four
(4) M6 x 1 - 25mm bolts. Use a flat
washer and lock washer with each bolt.
Tighten bolts into threaded holes on
stove body (see Figure 9 and Figure 11,
page 6). Use an adjustable wrench or a
10mm socket.
PRE-INSTALLATION
PREPARATION
Continued
Continued
4"
4"
Figure 9 - Locating Threaded Holes for
Stove Bottom, Legs, and Door Attachment
Door Hinge
Step Bolt Hole
Door Catch Bolt With
Adjustable Hex Nuts Hole
Leg
Hole
Leg Hole
Leg
Hole
Stove
Bottom
Hole
Front
Bottom Of Stove Unit
Bolt
Product
Identification
Label
Back
Stove
Panel