6
Keep the air hose as short and free of cur-
ves as possible to avoid bottlenecks.
Air-conditioning with installation
If required, your appliance can be installed semi-
permanently(Fig.7).
Proceedasfollows:
• Drilla 5.27 inch(134 mm) dia.hole in an
outside wall or through a window pane, re-
spectingtheheightsshowning.8.
• Fittheangeaccessory(S)providedinthe
holefollowingthe indicationsings. 9,10
and 11.
12 inch
30 cm
30 cm
12 inch
MAX 39 inch
MIN 14 inch
in the window
pane
in the wooden
kickboard of
aFrench
window
inthewall:youare
recommended
to insulate the
section
of wall using
suitable insulation.
• Fittheairexhausthose(K)inthehousingat
thebackoftheappliance(g.1).
• Fittheendofthehosetotheange(S).
Whenthehoseisnottted,theholecanbe
closed with the flange cap.
• Removethecapatthebackoftheappliance
(G)andreplacewiththedrainhosepluscap
(U)asshowningure12.Thisenablesthe
condensate to be drained more easily at the
endoftheseason.Seethesection:“ENDOF
SEASONOPERATIONS”.
Keep the air hose as short and free of cur-
ves as possible to avoid bottlenecks.
When installing the air conditioner semi-
permanently, you should leave a door slightly
open, as little as 0.5 inch (1 cm), to guarantee
correct ventilation.
7
10 11
8
134
5 inch
12
9
• If the windows are large, use the window
bracket without holes (V) (if provided) to co-
ver your window aperture, extending it to the
required length, then blocking it with the lo-
ckingpinssupplied(seegure6).Makesure
you do not cover the hole for the window
outlet.
1
3
2
6