Filter
Top Products
12 13
HOW TO RESET THE AUTO DIALER
Inside the battery compartment:
Remove the power supply and the Auto Dialer from the wall. Remove the 7.2V battery. Then
remove the SIM card. Inside the battery compartment is a switch. Move it to the ERASE
position. Connect the power to the Auto Dialer then press DELETE twice. There will be 2
short beeps from the Auto Dialer. Switch the power o again. Replace the SIM card, place
switch back to NORMAL. Replace the 7.2V battery and place back onto the wall. Power the
Auto Dialer back up. The Auto Dialer will then return to factory default setting.
NOTE AND CAUTION:
A leaking battery will result in poor performance and could damage the system. It is
recommended that the batteries be periodically checked. Change the batteries at least
once a year to maintain the system.
DO NOT mount the Auto Dialer in areas that are exposed to extreme heat or moisture, as
this could adversely aect the performance of the system.
Use only a damp cloth and general household cleaning agent to wipe the unit clean. DO
NOT use turpentine, thinner, gasoline or similar substances to clean the unit.
CAD-05 Kit Manual.indd 13 10/15/2009 9:40:53 AM