Filter
Top Products
21
1. Press the ON/OFF button on the
remote control to turn the unit on;
the On LED will light on the indoor
unit and “ON” will light in the re-
mote display.
2. Make sure the indicator appears
in the remote display. Using the TEMP.
▼or▲ buttons, set the desired tempera-
ture. The desired temperature can be changed up or down 1 degree
from the actual room temperature. For temperature setting: 24~28°C
AUTO
3. Then the unit will automatically
operate.
TO SET THE UNIT TO AUTO MODE
This unit will automatically operate the unit according to its surroundings while in the Auto mode. All you have to set is
the desired temperature and it will control the fan, coolness and dehumidifier. Follow procedures below:
AUTO
SET UNIT TO QUICK MODE
To set this unit to cool at the highest power, follow the procedures below:
1. Press the ON/OFF button on the re-
mote control to turn the unit on; the On
LED will light on the indoor unit and
“ON” will light in the remote display.
2. Press the MODE button until the Quick
(
“ ”
) indicator appears in the dis-
play.
3.
The unit will then start cooling the room at the highest power.
AUTO
1. Press the ON/OFF button on the re-
mote control to turn the unit on; the On
LED will light on the indoor unit and
“ON” will light in the remote display.
2. Press the MODE button until the Cool
indicator appears in the display.
3. Using the TEMP. ▼or▲ buttons, set
the desired temperature. The desired
temperature can be changed up to
32°C and down to 18°C.
4. To select the fan speed, press the FAN
SPEED button until the desired speed ap-
pears in the display (see below).
FAN SPEEDS
“AUTO” The fan will automatically select the fan speed.
“ ” The fan will operate on low speed.
“ ” The fan will operate on medium speed.
“ ” The fan will operate on high speed.
“NATURAL” The fan will randomly cycle through the speeds
simulating a cool breeze.
TO SET UNIT TO COOL MODE
To set the unit to cool the room to a desired temperature, follow the procedures below: