Filter
Top Products
17
LOCATION OF CONTROLS
INDOOR UNIT
■
Remote Control Signal Receiver
This place is the part to receive the signal if it receive
the signal, you can hear the signal “beep. beep”.
■
There is a switch panel at inside of Front
Panel. At the time of operating, open the
Front Panel.
Emergency switch can be used when the remote
controller is lost or Testing.
Remote switch is usually used by remote controller.
Indoor Unit Display Switch Panel
Timer (Yellow)
Lights during the time
reservation mode.
Quick (Red)
Lights during the
Quick Mode.
ON (Red)
Lights when the
operation is going on.
Air clean (Green)
EMR. REMOCON