Filter
Top Products
iLux
™
Integrated Lighting Systems Crestron CLS-C6 Series
To exit Lights mode, press the Lights button again, or press Cancel. The LED will
go off, and the unit will revert to Standard mode.
Shades Mode
Shades mode allows you to manually adjust any of the six shade groups.
To enter Shades mode, press the Shades button. The LED will light, and the six
function buttons can now be used to adjust shade groups 1 through 6.
• Press the right side of the function buttons to open the shades; press the left
side to close the shades. Press the button while the shade is moving to stop
it.
• For presettable shade motors:
− The bargraphs show the current position of each shade group.
− While a particular shade group is being adjusted, the two-digit display
shows its position. (“CL” indicates fully closed; “OP” indicates fully
open; “1” – “99” indicate percent of the fully open position.)
• For non-presettable shade motors:
− The bargraphs will display nothing while a shade is not moving.
− While a particular shade group is being opened, its bargraph LEDs
scroll up and the two-digit display shows “OP.”
− While a particular shade group is being closed, the bargraph LEDs
scroll down and the two-digit display shows “CL.”
• The up/down button acts as a shades master in this mode, no matter what
function is programmed for it. Press the top of the button to open the
shades; press the bottom of the button to close the shades. Press the button
while the shades are moving to stop.
The ON and OFF buttons operate normally while in Shades mode.
To exit Shades mode, press the Shades button again, or press Cancel. The LED will
go off, and the unit will revert to Standard mode.
• iLux
™
Integrated Lighting Systems: CLS-C6 Series User Guide - DOC. 6395B
6