Filter
Top Products
iLux
™
Integrated Lighting Systems Crestron CLS-C6 Series
12. To adjust the fade time, press the ^ and v buttons. When going up, the value
will go from 0 seconds to 59 seconds, and then 1 minute to 99 minutes.
When going down, the value will go from 99 minutes to 1 minute, and then
59 seconds to 0 seconds. The Min and Sec LEDs light as appropriate.
Adjustment to fade time can be made when either Lights mode or Shades
mode is active.
13. When all the lighting loads are at the desired level and shades are at the
desired position, press Save to save these settings as the new preset for that
scene. If you make a mistake while changing a setting, press Cancel to
discard changes and return to Standard mode before pressing Save.
14. Repeat the above procedures for all scenes that require changes.
• iLux
™
Integrated Lighting Systems: CLS-C6 Series User Guide - DOC. 6395B
8